10.4“ HANDHELD CONTROL PANEL
HBG 1011
16.08.2018
Page 7
2.2
General Safety Guidelines
According to the EU guideline 2006/42/EG, the operating instructions are a
component of a product.
This handbook must therefore be accessible in the vicinity of the machine,
since it contains important instructions.
The technical documentation should be included in the sale, rental or transfer
of the product.
Please read the corresponding data sheets and operating instructions thor-
oughly before handling Safety modules. SIGMATEK is not liable for damages
caused through non-compliance with these instructions or respective the
regulations.
The general and special safety instructions described in the following sec-
tions, special safety instructions and technical regulations must therefore be
observed.
Subject technical changes, which improve the performance of the devices.
The following documentation represents a series of product descriptions and
does not serve to guarantee properties under the warranty.
In regard to the requirements for Safety and health connected to the use of
machines, the manufacturer must perform a risk assessment in accordance
with machine guidelines 2006/42/EG before bringing a machine to the mar-
ket.
