SIGMATEK 20-004-313, Руководство по эксплуатации

Страница: 37 / 56

S-DIAS CPU MODULE CP 313
29.05.2020 Page 35
26
WAIT
The CPU is busy.
Info…
27
OP PROG
The operating system is currently being
reprogrammed.
Info…
28
OP INSTALLED
The operating system has been
reinstalled.
Info…
29
OS TOO LONG
The operating system cannot be loaded;
too little memory. Restart, report error to SIGMATEK.
30
NO OPERATING
SYSTEM
Boot loader message.
No operating system found in RAM.
Restart, report error to SIGMATEK.
31
SEARCH FOR OS
The boot loader is searching for the
operating system in RAM.
Restart, report error to SIGMATEK.
32
NO DEVICE
Reserved
33
UNUSED CODE
Reserved
34
MEM ERROR
The operating system loaded does not
match the hardware configuration. Solution:
-
Use the correct operating system
version
35
MAX IO
Reserved
36
MODULE LOAD
ERROR
The LASAL Module or project cannot be
loaded. Solution:
-
Recompile and download the
entire project
37
BOOTIMAGE
FAILURE
A general error has occurred while
loading the operating system. Contact SIGMATEK
38
APPLMEM ERROR
An error has occurred in the application
memory (user heap). Solution:
-
Correct allocated memory access
error
39
OFFLINE
This error does not occur in the control. This error code is used in the
programming system to show that
there is no connection to the
control.
40
APPL LOAD
Reserved
41
APPL SAVE
reserved
44
VARAN MANAGER
ERROR
An error number was entered in the
VARAN manager and stopped the
program. Solution:
-
Read LogFile
45
VARAN ERROR
A required VARAN client was
disconnected or a communication error
has occurred.
Solution:
-
Read LogFile
-
Error Tree