SC40401-K10-15002A
2nd
27
Copyright 2018, SIGMAKOKI Co.,Ltd.
1
～
4) STG_UT1
～
4
：
Select the units for display
Set the units used to display position coordinates of OPTION_unit (JS-300, JB-400).
[Select item]
PULSE
：
Number of pulses
MICRO
：
Micron m units
DEGREE
：
Degrees units
5
～
8) DIVIDE1
～
4
：
Divide setting for SG-55M
Set Divide for each axis. (For SG-55M).
*)
With regard to the Driver and Servo-pack of non-SG-55M, set the number of divisions in the
Driver and Servo-pack.
[Select item]
1/2/4/5/8/10/20/25/40/50/80/100/125/200/250
9
～
12) PLS_RATE1
～
4
：
Pulse Rate setting(1
～
4axes)
Set the travel distance per 1 pulse for each axis.
*) Otherwise, it is not able to position correctly. (Setting Unit
：
：
：
：
0.1nm ) *1)
[Setting range]
1
～
1000000 (0.1nm
～
100
µ
m) *1)
*1) If “STG_UT1~4” setting is “DEGREE”, please setting Unit: 0.000001
°
°
°
°
.
13
～
16) MOVE1
～
4
：
Travel direction setting 1~4axis
Set + travel direction for each axis.
[Select item]
POS
：
Positive rotation
NEG
：
Negative rotation
17
～
20) ORG1 SEL
～
ORG4 SEL
：
Origin reset method setting
Set Origin reset method for each axis.
[Select item]
OFF
：
Origin reset OFF
MINI
：
ORG1
CENTER
：
ORG2
ORGS
：
ORG3
NORM
：
ORG4
ZPM
：
ORG5
ZPP
：
ORG6
*) Regarding each method, please refer to “Origin Rest Method”.
