Sigma SPRIZZA SPZ 40, Инструкция по эксплуатации и обслуживанию

Страница: 17 / 48

Instructions, use and maintenance manual Pag. 17/48
SRIZZA 40
10.3. Type of drive and motor
Drive: MECHANICAL
Motor type for SPZ 40 - M71: 0.55kW 230V 50Hz 1.5A SINGLE-PHASE
10.4. Storage and conservation of the machine
10.4.1. Storage
Storing the packaged machine:
The machine must be stored in a closed and covered place, on a smooth and solid surface protected from dust and
dirt, from atmospheric agents and in a hygienically safe place.
The temperature must be between -20 and +50°C, humidity must not exceed 90%.
Storing the unpackaged machine.
If the machine has already been unpackaged, in addition to the above, it should be lifted off the ground with a pallet
or other and covered to protect it from damp, dust and dirt. If it is wrapped with cellophane or another type of
plastic, do not hermetically seal underneath the machine to avoid corrosion due to condensation.
10.4.2. Storing the machine
Storage before a long period of inactivity:
•
Clean the machine thoroughly.
•
Disconnect it from the electrical system.
•
If possible, put it back in its original packaging.
10.5. Types and features of the product and of the treated materials
CONDITIONS OF USE:
•
Environmental conditions: the machine must be installed inside a lit, ventilated building, on a solid level
support. Temperature from 5 to 40°C with humidity not exceeding 90%.
•
Lighting: the light available to the operator must comply with the type of work performed, in relation to general
lighting, according to current regulations and, however, sufficient to read the controls, the hazard signals and
such not to blind the operator.
10.6. Type and features of machine emissions
•
Vibrations: in proper operating conditions, the vibrations are not such to give rise to hazardous situations.
•
Sound emissions: 70 dBA under normal use.
ATTENTION
Storing the machine outdoors is not allowed.