background image

page 50

Frequently asked questions

Important information, troubleshooting, and FAQ 

www.sigmasport.com

ROX 10.0

ROX 10.0

Blank display

 

Have you checked the RoX 10.0 gps”s charge status?

 

Is the battery charged?

 

Is the RoX 10.0 gps switched on?

Display weak/slow

 

Is the temperature too high (> 140 °F) or too low (< 32 °F)?

Incorrect speed displayed

 

Have two magnets been attached?

 

Is the magnet correctly positioned (parallel and centrally alligned to the ANT+ 
speed transmitter)?

 

Is the wheel size correctly set?

11.3 Frequently asked questions

Can I change the batteries myself?

The RoX 10.0 gps uses an integrated rechargeable battery. It is not possible for 
you to change this battery yourself.

All of the ANT+ transmitters use a CR 2032 battery which can easily be 
changed. you simply need a coin to open the battery compartment.

The battery will not fully charge

please disconnect the micro Usb cable from the RoX 10.0 gps and reconnect it 
after 20 seconds.  

Can another person with a different bike computer/heart rate monitor cause 
interference?

The ANT+ transmitter work on a high digital frequency and are extremely 
resistant to electromagnetic interferences. The pairing process assigns the 
transmitters to specific bikes. All other ANT+ transmitters that are not paired 
are ignored in training mode. This almost entirely prevents any interference 
between two different devices. 

How long will the battery in the transmitter last?

In general, all three transmitter batteries should last at least a year (based on 
one hour of use each day). The heart rate transmitter”s battery lasts for three 
years.

Is the ANT+ transmission system compatible with other transmission 
systems (e.g. Bluetooth, STS, DTS etc.)?

No, the various transmission systems are not intercompatible.

Why has the altitude changed even though I have not moved?

The RoX 10.0 gps”s altitude measurement is based on a barometric altitude 
measurement. barometric air pressure constantly changes, therefore current 
altitude can change even though you are not moving. 

Содержание ROX 10.0 G





























































Отзывы: