2-16KC
Technical Data
Version 03/2010, Rev. 1.7 of 27/01/2012
53
Translation of the original operating manual
10 Technical Data
Manufacturer:
S I G M A Laborzentrifugen GmbH
An der Unteren Söse 50
37520 Osterode (Germany)
Type:
2-16KC
Electr. Connection:
Protection class:
IP Code:
see name plate
I
20
Connected load (kVA):
Power consumption (kW):
Max. current consumption (A):
1,05
0,72
4.0 (at 220-240 V / 50-60 Hz)
8.0 (at 120 V / 60 Hz)
Performance data
Max. speed (rpm):
Max. capacity (ml):
Max. gravitational field (x g):
Max. kin. energy (Nm):
15 300
400
21 918
9 962
Other parameters
Time range:
Temperature range:
Heater (Special equipment):
Storage locations:
short run, continuous run,
10 sec – 9 h 59 min
-20 to +40°C
-20 to +60°C
50
Physical data
Height (mm):
Height with opened lid (mm) :
Width (mm):
Depth (mm):
Weight (kg):
EMC as per EN 61326:
Noise level (dBA):
320
700
550
570
60
Class B
< 65 (at max. speed)
Fig. 10.1: Technical Data
10.1 Ambient Conditions
The figures are valid for an ambient temperature of
+23°C 2 °C and a nominal voltage 10 % . The minimum
temperature is < +4 °C and depends on the rotor type, speed, and
ambient temperature.
Allowable ambient tempe5°C to +35°C.
Max. relative humidity of air 80% up to 31°C with a linear
decrease to 67% relative humidity of air at 35°C.
Special equipment Heater: In order to reach the stated final
temperature, the rotor and buckets must be preheated by running
at approximately 1,500 rpm. The maximum rotor temperature that
can actually be reached is 40-60°C, depending on the rotor and
speed.
At a nominal voltage of 100V or 200V, a tolerance of +10% / -5% applies.
