SIGLENT SDS1102X, Руководство пользователя

Страница: 176 / 188

SIG L ENT
156 SDS1000X User Manual
To Set Wave Type and Parameters
1. Press the WaveGen button on the front panel to open the build-in Arbitrary waveform
generation function. The first press lights up the backlight of the button, opens the
output and enters the WAVEFORM function menu. A second press of the
WaveGen
button will turn off the backlight and the output.
2. Press the Wave Type softkey; then turn the Universal Knob to select the desired
waveform and push down the knob to confirm. Press the Wave Type softkey
continually can also select the waveform type.
3. Press the Frequency softkey; then turn the Universal Knob to select Frequency,
Frequency Fine , Period or Period Fine and push down the knob to confirm; turn the
Universal Knob to select the desired value. Use the same method the set the other
parameters.
Wave
Type
Character
Frequency
Range
Amplitude
(High-Z)
Offset
(High-Z)
Sine
Use the Universal Knob to
adjust the Frequency/ Frequency
Fine/ Period/ Period Fine/
Amplitude/
Amplitude Fine/
High-Level/ High-Level-Fine/
Offset/ Offset Fine/ Low-Level/
Low-Level-Fine value.
1uHz~25MHz 4mV~6V ± 3.0V
Square
Use the Universal Knob to
adjust the Frequency/ Frequency
Fine/ Period/ Period /Fine/
Amplitude/
Amplitude Fine/
High-Level/ High-Level-Fine/
Offset/ Offset Fine/ Low-Level/
Low-Level-Fine/ Duty value.
1uHz~10MHz 4mV~6V ± 3.0V
Ramp
Use the Universal Knob to
adjust the Frequency/ Frequency
Fine/ Period/ Period Fine/
Amplitude/
Amplitude Fine/
High-Level/ High-Level-Fine/
Offset/ Offset Fine/ Low-Level/
Low-Level-Fine/
Symmetry
value.
1uHz~300KHz 4mV~6V ± 3.0V
pulse
Use the Universal Knob to
adjust the Frequency/ Frequency
Fine/ Period/ Period /Fine/
Amplitude/
Amplitude Fine/
High-Level/ High-Level-Fine/
1uHz~10MHz 4mV~6V ± 3.0V
www.biall.com.pl