22 Copyright ©Sigicom AB
4.3
Quick Start V10 and V11
In this section, V1x means V10 or V11.
1.
Connect your V1x Geophone with your INFRA Datalogger
by using any of the available INFRA Sensor Cables.
2.
Start the Datalogger and wait for the initialization process to
complete.
3.
Under the menu
Nodes
you’ll find your V1x unit as
GEO V1
x
-
<serial.no>
,
where GEO is the Customer string and
<serial.no>
is the
serial number.
4.
Select GEO V1x-
<serial.no>
in order to set Standard (S01,
S02, etc.). Then, for the chosen standard, select
• Interval time
• Record time
• Threshold (level and ON/OFF).
Note! When performing a test or reference measurement,
make sure that the threshold is set to OFF. Otherwise
unnecessary transients will be recorded.
5.
Activate REG ON, and the measurement will be initiated.
6.
Note!
First registration of interval data is delayed to
synchronize to the local time. The delay may last up to one
interval period. First presentation of data will then be delayed
up to two interval periods. Transient triggering and readout
of Live-values are available directly after activation of REG
ON.
