Sigfox WSSFCB-NH3, Руководство пользователя

Страница: 32 / 36

No. Phenomena Reason Solutions
1
Node does not send RF to base
station periodically, LED does not
blink
No power supply or battery
ran out
Configuration sending
cycle is incorrect
Check that the battery is
empty or not installed
correctly
Check the power supply
Check the send cycle
configuration
2
Node does not send RF to base
station according to the alarm,
LED does not blink
The alarm configuration is
incorrect
Running out of the number
of alarms set for the day Check alarm configuration
Check the configuration for
the maximum number of
alarms per day
3
Node does not send RF to base
station when activated by the
magnetic switch, LED does not
blink
Magnetic switch has
malfunctioned
Or place the Magnet key
not right position
Locate the correct position
for magnet key
Read the status of the
magnetic switch via
modbus (when powering or
attaching the battery) to
see if the magnetic switch
is working.
4
Node has blinked LED when
sending RF but the base station
cannot received
Out of the number of RF
packages of uplink per day
(140 packages / day)
Check on the base station
whether the event
message exceeds the
number of RF packets
5
Node has sent RF but the LED
does not blink LED malfunction Contact manufacturer
6
The measurement values from
sensor do not change, keep
constant values for long time
Sensor got failure
Sensor cable broken
Sensor connector is not
connected firmly
Check sensor cable and
connector
If the issue is still exist,
please contact
manufacturer for warranty
or replace new sensor
9. Troubleshooting