Sifam Tinsley Theta 30P, Руководство по эксплуатации

Страница: 30 / 84

Pressing “ Up” key will confirm the
displayed condition and if enabled
then will advance to the Elbow value
of setting (section 3.1.8.4) otherwise
Elbow enable/disable confirmation
Pressing key will re-enter “ Down”
into Elbow enable / disable Edit mode.
Output Characteristics selection(section 3.1.9).
This screen appears only when Elbow is enabled. This screen allows
user to set Elbow value in-between (start value set+(0.015*End value set))
and 98.5 % of the end value set.
Pressing “ Up” key will confirm the
present value as Elbow value of the
Input and advance to the Output
characteristics selection(section 3.1.9).
Pressing the “ Down” key will enter
e
into the “Input Elbow valu edit” mode.
3.1.8.4 Elbow value of Input
30
Pressing the “ Down” key will
enter the “ Elbow enable or disable
edit” mode and scroll the value
between yes and no.
YES : Elbow function is enabled.
no : Elbow function is disabled.
Pressing “ Up” key will accept the displayed condition
function is enabled then transducer will advance to the Elbow value
setting(section 3.1.8.4) otherwise advance to the output Characteristics
selection(section 3.1.9). .If Elbow
3.1.8.3: Elbow Function Selection
This screen allows the user to enable or disable Elbow function of
input.This is applicable only for Active / Reactive / Apparent Transducer