2
User Codes
10
How to Assign or Change User Codes
To Assign or Change
a User Code:
1.
Press and hold the
[user prg] key for 2 seconds
until you hear two beeps.
You see:
ENTER
MASTER CODE
Enter the master user code.
The first available user num-
ber is shown.
2.
To select another user num-
ber, enter that two-digit num-
ber and press
. If a
user code has been assigned
to this number, it is displayed,
one number at a time.
3.
Enter the new 4-digit user
code. As you enter each of
the 4 numbers of the code, the
keypad draws the four sides
of a square and beeps twice.
User codes can be created or
changed as often as you like.
Any code you select must be
four numbers long.
You cannot use 0000, or assign
the same code to more than
one user number. Avoid codes
that are easy to guess, like
1234. The default master user
code (user number 1) is 5832.
For security reasons, be sure
to change this code. Do not as-
sign the code 5832 to another
user.
If you make a mistake while
assigning a user code, you
may correct it by repeating the
procedure.
You may stop the procedure at
any time by jumping ahead to
the final step (namely, press-
ing and holding the
key
for two seconds.
Be sure to record the user
codes, and to keep these
records in a safe place.
www.ukpanels.com
