manualshive.com logo in svg

Sierra S5020, Руководство пользователя

Поделиться
Скачать
Sierra S5020 Скачать руководство пользователя страница 12

2

User Codes

8

User Codes and User Numbers

A user code is a secret four-digit number, used to arm and dis-
arm the system, and possibly to make other changes.  Every in-
dividual who has a user code is also assigned a two-digit user
number.  You cannot assign the same user code to more than
one user number.

You can assign a different user code and user number to each
person who operates the system.  Your security system supports
up to 60 users.

If you prefer, you can assign only one user code and user num-
ber to a group of users.  This is not recommended, since it will
then be impossible to determine which individual gave a specific
command.

Selecting the Right User Number

At installation, each user number is assigned rights and privi-
leges.  For example, user number 18 may have the rights to arm,
disarm, and bypass zones.   This is true even if, in this example,
there is no user 18 using the system.

Thus, if you want to assign a user code to a new user, 

be sure

that you select a user number with the privileges you want that
user to have. Your installer should have provided you with spe-
cific information about how your system was configured.  Refer
to this information to select the proper user number.

www.ukpanels.com

Содержание S5020









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды