Rev 3 9/21/17
6
41110479
1
1: Introduction
Now that you have your mangOH™ Red, it’s time to start using it!
Use this guide to:
•
Assemble your mangOH Red
•
Set up your dev machine for mangOH development
•
Install and run applications, and send data to the IoT Cloud via AirVantage, Sierra Wireless’ cloud-based
service platform for over-the-air (OTA) device management.
To get started with a native Linux dev machine, or for other mangOH Red resources (guides, tutorials, etc.), visit
mangoh.io/mangoh-red-resources
1.1 Get Started!
Before you begin, make sure your dev machine meets the minimum suggested requirements in
for mangOH Red application development.
Important:
Use this guide only if you are using a Windows computer (dev(elopment) machine). This guide
includes instructions for Windows® dev machines using CLI (Command Line Interpreter).
Important:
Follow all steps as described. If you skip, change, or ’jump around’ steps, your device or devel-
opment environment may not work properly.
Note:
The instructions in this guide have been tested using the Legato Virtual Machine with a 64-bit
Ubuntu 16.04 guest OS, available at
mangoh.io/mangoh-red-resources-getting-started
. If you use a different
configuration and need assistance, please check out the forum at
Step 1
Step 2
Step 3
Step n-1
...
Step n
Step 1
Step 2
Step 3
Step n-1
...
Step n
