F.2: Inserting a CF3 module
Rev 3 9/21/17
57
41110479
F.2 Inserting a CF3 module
To insert a CF3 module on the mangOH Red board:
1.
Insert the CF3 module—Hold the module above the socket and line up the triangles on the module and
socket. The module will drop straight into the socket. (Position matters!)
2.
Hold the module cover over the module and line up the circle on the cover with the triangle on the label, then
press the cover (on the edges) into place.
The triangle on the label
matches the position of the
triangle on the socket.
The triangle on the label
matches the position of the
circle on the cover.
