Sierra Wireless Airlink GX450, Руководство пользователя по оборудованию

Страница: 20 / 72

AirLink GX Series Hardware User Guide
20 4114008
Figure 2-5: Inserting the SIM card (Wi-Fi X-Card installed)
7. Ensure the black gasket is in place at the base of the SMA antenna
connector.
8. Re-install the decorative black cover:
a. Line up the SMA antenna connector with the hole in the cover.
b. Tilt the rear of the cover slightly to make sure the front bottom of the
cover seats in the front ridge. Slide the cover into place, and then push
the top of the cover down.
It may require some force to make sure the 4 holes in the cover line up
with the threaded holes on the top of the device. You may need to push
from the front as well to ensure that the holes line up properly.
9. Use the 4 screws saved in step 2 to re-attach the decorative black cover.
Torque the screws to 5 in-lb. (0.6 N-m). Ensure that the screws are tight so
that the seal underneath the decorative black cover is tight against the device.
Note the direction of notched
corner of SIM card for
proper alignment.
black gasket