Sierra Wireless AirLink FX100, Руководство пользователя

Страница: 20 / 114

4112221 Rev 7.2 June 19, 2013 20
User Guide Features and Services
Features Description
Data

Data circuit asynchronous

Transparent and Non Transparent modes

Up to 14.400 bits/s

MNP Class 2 error correction

V42.bis data compression
UMTS Data
Transfer
(FX100 only)
BAND I, II, V, VI, VIII (2100/1900/850/800/900) up to 384kbits/s
HSXPA
(FX100 only)

BAND I, II, V, VI, VIII (2100/1900/850/800/900)

HSDPA Cat 10 up to 14.4Mbits/s

HSUPA Cat 6 up to 5.76Mbits/s
FAX
(FXT009 only)
Automatic fax group 3 (class 1 and class 2)
Audio

Echo cancellation

Noise reduction

Full Rate, Enhanced Full Rate, Half Rate operation and Adaptive Multi-Rate
(FR/EFR/HR/AMR)

Dual Tone Multi Frequency function (DTMF). Note that this can be supported by
FX100 with Firmware 7.52.A1 or later.
2.2. Supported Bands
The FX Series come in two variants, supporting various bearers and bands. The FXT009 is a quad
band programmable modem that support either EU bands (EGSM900/DCS1800) or US bands
(GSM850/PCS1900). Users may switch from one supported band to another by using AT commands.
The FX100 is also a quad band EGSM900/DCS1800/GSM850/PCS1900 that also supports penta
band UMTS/HSPA (WCDMA-FDD) 2100/1900/850/800/900 (Band I, II, V, VI and VIII). Band selection
is done automatically without having to switch manually using AT commands.
Refer to sections 9.4 Checking the Band Selection and 9.5 Switching Bands for more information
regarding switching bands.
2.3. X-card Interface
The FX Series offers a 50-pin X-card interface accessible to customers. It is an additional interface for
customers to expand their application features by simply plugging in an X-card through the mating
connector of the X-card interface.
Refer to section 7 X-card for more information about the X-card supported by the FX Series.