Page 36 of 56
5/. Undo the set screw on the air shutter and adjust accordingly then retighten the set screw. / Défaire la
vis de réglage sur le volet d'air et d'ajuster en conséquence, puis resserrez la vis de
réglage.
6/. Reassemble the fireplace in reverse order from 3 through 2. / Remonter la cheminée dans l'ordre
inverse de 3 à 2.
7/. Turn on the gas. / Allumez le gaz.
Factory Setting
Natural Gas – 1/8” (3.175mm)
Aeration adjustment is important for the correct functioning of the appliance. Carbon build up, flame
lifting or any malfunction due to improper aeration adjustment during installation is not covered under
the factory warranty.
Réglage de l'aération est importante pour le fonctionnement correct de l'appareil. Une accumulation
de carbone, de levage flammes ou de toute défaillance due à une mauvaise aération d'ajustement
lors de l'installation n'est pas couvert par la garantie d'usine.
3.3.10 ALTITUDE ADJUSTMENT
Altitude
Natural Gas – Orifice Size
0 – 2000 ft (0 – 610 m)
44
2000 – 4000 ft (610 - 1219 m)
45
4000 – 6000 ft (1219 - 1829 m)
46
All valves have been pre-set and certified for installation at elevations from 0 – 2000 feet (0 – 610m)
above sea level.
When installing this unit at higher elevations, it is necessary to decrease the input rating by replacing
the existing burner orifice with a smaller size for installations over 2000 feet (610m). The appliances
CAUTION
ATTENTION
PARTS REQUIRING ADJUSTMENT DURING OPERATION MAY BE HOT.
PIECES NECESSITANT REGLAGE PENDANT LA MARCHE PEUT ETRE CHAUDE
Air tube and Air shutter shown removed
for clarity purposes only.
Set Screw
Содержание Newcomb 36
