Siemens WM14VMH5NL, Руководство пользователя и инструкции по установке

Страница: 58 / 76

NL Troubleshooting
Malfunction
Cause and Troubleshooting
"E:30 / -80"
▶
Remove unauthorized extensions to the wa-
discharge hose. Connect device
"E:36 / -25 / -26" Drain pump is clogged.
▶
→ " Cleaning the drain pump", page 52
"E:38 / -25 / -26" Drain pump is clogged.
▶
→ "
Cleaning the drum", page 50
if the error is displayed again,
▶
→ "
Cleaning the drain pump", page 52
Inlet opening of the rubber sleeve is clogged.
▶
→ "
Clean the inlet opening in the rubber sleeve",
Page 54
Water pressure is low.
No solution possible.
Strainer in the water supply is clogged.
▶
Clean the strainer in the water supply →
Page 55.
Water tap is closed.
▶
Open the water tap.
Water supply hose is kinked or pinched.
▶
Make sure that the water inlet hose is not
nods or clenches.
"E:35 / -10"
Water in the bottom tray.
▶
Close the tap.
▶
Please contact customer service.
→ "Service", Page 68
Device is leaking.
▶
Close the tap.
▶
Please contact customer service.
→ "Service", Page 68
Detergent dosage is too high.
▶
Immediate measure: mix a tablespoon of fabric softener
ter with 0.5 l of water and pour this mixture into the left
compartment (not for outdoor, sportswear and down
textiles).
▶
During the next wash, reduce by an equal amount.
load the amount of detergent.
burns.
Temperature is too high.
▶
Wait for the temperature to drop.
▶
→ "
program cancel", Page 42
Water level is too high.
58