Siemens WM14VMH5NL, Руководство пользователя и инструкции по установке

Страница: 17 / 76

Set up and connect NL
1.
Connect the water inlet hose to the
tap (26.4 mm = 3/4").
Drain in a
washbasin
the water drainage
feeding hose with
a bend
confirm and
secure.
¾
min.
10mm
Drain in and
plastic stand
pipe with rubber
the water drainage
feeding hose with
a bend
min.
17mm
ren sleeve or in a confirm and
drain. secure.
2.
Open the tap carefully and check
that the connections are tight.
Water drainage connection types
The information will help you connect this
appliance to the water outlet.
4.6 Adjusting the device
Remark: Take the information on the
topic of safety → Page 4
and avoid material damage
→ Page 11 take care of your device
to use safely.
To reduce noises and vibrations and
to avoid walking the device, level the
device.
Remark: Take the information on the
topic of safety →
Page 4
and avoid material damage
→
Page 11 take care of your device
to use safely.
LOOK OUT!
When draining, the water drain hose is
under pressure and can come loose
from the installed connection position.
▶
The water drain hose against un-
intended to secure loosening.
1.
Loosen the lock nuts with a SW17
open-end wrench.
Remark: Observe the pumping
heights.
The maximum pumping height
is 100 cm.
The connection position
tie with a
hose clamp
(24-40 mm) bore
gene.
17