NL Cleaning and maintenance
4.
Install the pump cover.
17.6 Cleaning the inlet opening
in the rubber sleeve
-
Check that the pump cover
components are correctly
assembled.
Regularly check the inlet opening in
the rubber sleeve for blockages and
clean the inlet opening.
1.
Open door.
2.
Check inlet opening for blockages
and clear blockages.
5.
Fit the pump cover and tighten it
as far as it will go.
90°
Remark: Do not use pointed or sharp
objects.
17.7 Cleaning the water drain hose
on the siphon
The pump cover handle must
be vertical.
1.
Turn off the device.
2.
Disconnect the plug of the device
from the mains.
6.
Place the service cover and click it
into place.
1
2
7.
Close the service door.
54