Siemens TALON Series страница 7 Скачать руководство пользователя

Страница: 7 / 50

TX-I/O Product Range Overview

CAUTION

This device includes electrical and electronic components and must not be
disposed of as domestic waste. Product recovery and disposal must comply with
all national and local regulations.

TX-I/O™ is a line of I/O modules with associated power and communication modules

for use within the TALON system. The I/O modules reside on the TX-I/O

island bus,

which simultaneously carries the supply voltages for the I/O modules and the field

devices and provides communication bus between the island bus controller and the

connected TX-I/O modules.
TX-I/O island bus communication requires one of the following controllers:



TC Modular



TC-36

TC Modular



The TC Modular connects to the island bus through a TX-I/O Power Supply or TX-

I/O Bus Connection Module using standard DIN rails.



The TC Modular provides the control database and communications for points on

TX-I/O modules, but it does not supply power.

TC-36



The TC-36 connects to the island bus through a TX-I/O Power Supply or TX-I/O

Bus Connection Module using island bus connectors.



The TC-36 provides the control database and communications for points on TX-I/O

modules, but it does not supply power.

Siemens Industry, Inc.

TALON TX-I/O Modules and Island Bus Technical Reference

588-587

CONFIDENTIAL: For internal use only

4/6/2010

Содержание TALON Series



















































Результаты поиска

Содержание TALON Series

Отзывы:

Похожие инструкции для TALON Series

Бренды по названию

Популярные бренды

Siemens TALON Series, Техническое справочное руководство

Результаты поиска

Содержание TALON Series

Отзывы:

Похожие инструкции для TALON Series

Бренды по названию

Популярные бренды