Starting the System
41
Siemens Building Technologies
Fire Safety & Security Products
09.2008
9.4
Creating System Users
By default the SPC system only allows engineer access on the system. The
engineer must create a user profile to allow on-site users to Set, Unset, and
perform basic operations on the system as required. An ellipsis (…) on
accompanying graphics denotes when there is a choice of menu selection by
scrolling.
To create a user:
1.
Enter the Engineer Programming code
(default 1111).
2.
Using the up/down arrow keys, scroll to the
USERS option.
3.
Press SELECT.
Î
The option to ADD a user is displayed.
4.
Press SELECT.
Î
The system generates and displays next
available user name.
5.
Press SELECT to use the default name and
numbers displayed, or use the Keypad to
enter a customized user name and press
SELECT.
6.
There are three types of users available:
STANDARD USER, MANAGER, or
LIMITED USER. Scroll to the preferred type
and press SELECT. Note that these profiles
are defaults and can be changed.
The system generates a default code for
each new user. To change this code, overwrite the digits shown in the initial
digits field.
7.
Enter the user code that will be assigned to the new user and press SELECT.
Where User Duress feature is enabled, consecutive user codes (i.e. 2906, 2907)
are not permitted, as entering this code from the Keypad would activate a user
duress event.
Î
The Keypad confirms that the new user has been created.
...USER...
EXIT
SELECT
...USER1...
BACK
SELECT
...ADD...
BACK
SELECT
...STANDARD USER...
BACK
SELECT
CODE 1234
BACK ENTER
USER1 CREATED
