56
Siemens Building Technologies
Fire Safety & Security Products
08.2006
12.1.2 Access to the OSD with Bewator controllers
To gain access to the OSD you will need to enter the telemetry controller's
programming mode.
Bewator 6000 series controller
OSD access on the 6000 series requires the entry of a PIN number, and is
therefore restricted to authorised persons only:
1.
Enter the 6 digit PIN number.
2.
Select "Setup camera" from the menu.
3.
Select the item by pressing the "Play" key.
4.
Use the following keys to navigate the menus:
Key Function
Menu On/Off
Up
Down
Enter
Left
Right
Bewator v3i controller
1.
Turn the key to enter programming mode.
2.
Press
to move to the 2nd page.
3.
Select ‘Camera Setup’.
4.
Select the relevant v3i option to navigate the menus.
12.1.3 Access to the OSD with 3rd party controllers
1.
Press 95 Preset Recall.
OR
Preset 2 Recall, Preset 2 Recall (within 2 seconds of each other).
NOTE
Both special presets for accessing the menu can be changed or disabled using the XTU. See Section
10.3: The XTU main menu for details.
2.
Navigate the menus using the joystick.
3.
To select use Preset 3 Recall.
NOTE
Use Preset 1 to toggle between Pan / Tilt (camera operation) and OSD menu navigation.
Содержание Solaris CCDS1415-DN
Страница 73: ......