manualshive.com logo in svg

Siemens Solaris CCDS1415-DN, Руководство по настройке, Страница: 23 / 74

Поделиться
Скачать
Siemens Solaris CCDS1415-DN Скачать руководство пользователя страница 23

 

23

 

Siemens Building Technologies

 

 

Fire Safety & Security Products 

 

08.2006

 

 

6. 

Lower the complete assembly into place, allowing the Dome to pass through 
the hole in the ceiling tile.  

 

7. 

Ensure that the brace bar is correctly located on the support framework and 
then fix it using the screws provided. 

8. 

Fit the supplied bezel. 

 

 

 

 

 

 

NOTE 

The Dome can be lowered or raised depending on the situation by adjusting the height of the support 
screws. 

 

 

 

 

9. 

Connect the cable connector to the socket. 

Î

 

The ceiling tile installation is now complete. 

8.4 

Preparing the Dome bracket 

 

The Dome bracket is provided with a standard 1.5" BSP thread and stainless steel 
lock nut to enable it to be used with a range of standard mounting hardware. The 
bracket is constructed of two parts, which can be turned in respect of each other to 
allow for a vertical or horizontal mounting arrangement. 

To prepare the bracket for mounting the Dome: 

1. 

Orientate the two parts of the bracket correctly. 

 

 

Содержание Solaris CCDS1415-DN











































































Отзывы:

Нет отзывов