©
Sieme
ns
AG
2003, C:\Daten\Sieme
ns\
Pr
od
uk
te
\SK
65\output\FUG
\SK
65_FUG_
en_040811_
te_p
k_
druc
k\SK65
_Net
work.f
m
Setup
94
VAR Langua
ge: en; V
A
R issue
date: 040728
left page (94)
of SK65 FUG en, A31008-H4960-A1-1-7619 (11.08.2004, 15:59)
Create/change entry:
<Empty>
or select an existing entry,
then select a new service
provider in the list and
confirm.
Record new service provider
(last entry in the list):
Furth.network
Select, enter the provider data and
save it.
Band selection
b
Select either GSM 900, GSM 1800,
or GSM 1900. Make sure that your
service provider also supports the
selected band.
Fast search
When this function is active, net-
work reconnection is speeded up
(standby time is reduced).
User group
b
Depending on service provider, you
can create groups with this service.
These can have access to internal
(company) information, for exam-
ple, or special rates apply. Please
check with your service provider for
details.
Active
Activate/deactivate function. "User
group" must be deactivated for nor-
mal phone use.
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are
obtained from your service provider.
All outgoing
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Pref. group
If activated, calls may only be made
within this standard user group
(depending on the network configu-
ration).
Additional information
If you are outside your home network, your
phone automatically dials another GSM
network.
If the signal strength of the preferred net-
work is inadequate when you switch on the
phone, the phone may register in a differ-
ent network. This can change when the tel-
ephone is next switched on or if another
network is selected manually.