Siemens SIWAREX WL200 Series Скачать руководство пользователя страница 39

Страница: 39 / 102

SIWAREX WL200
Operating Instructions, 07/2016, A5E02199611B-03

Service and maintenance

7.1

Basic safety instructions

Servicing and maintenance of the load cells

The load cells are in general maintenance free. Regular inspection and checking of the

mechanisms for force transfer, oscillation limitation, lifting and overloading will however

improve their reliability. The inspections should also be performed after serious

environmental events such as storms, floods or earthquakes.
If signs of corrosion appear, we recommend a suitable protective coating.

NOTICE
Damage to load cells, measurement errors

•

Dirt must not be allowed to accumulate in the vicinity of a load cell.

•

Do not subject cable glands and seals to the jet from a high-pressure hose.

Regular maintenance of overload protection

Overload protection mechanisms must be protected against deposits of dirt and ice.
The correct operation of overload protection must be tested during periodic maintenance

work.

7.2

Cleaning

Cleaning the enclosure

●

Clean the outside of the enclosure with the inscriptions and the display window using a

cloth moistened with water or a mild detergent.

●

Do not use any aggressive cleansing agents or solvents, e.g. acetone. Plastic parts or the

painted surface could be damaged. The inscriptions could become unreadable.

7.3

Return procedure

Enclose the bill of lading, return document and decontamination certificate in a clear plastic

pouch and attach it firmly to the outside of the packaging.

Содержание SIWAREX WL200 Series







































































































Результаты поиска

Содержание SIWAREX WL200 Series

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIWAREX WL200 Series, Руководство по эксплуатации

Результаты поиска

Содержание SIWAREX WL200 Series

Отзывы:

Бренды по названию

Популярные бренды