Revision 09/04
Guiding for comb. mounting unit
Document No.: A5E00353789B
Page 32
4.1.2 Construction
The guiding consists of two flanges (6) which are bolted to the top plate (9) and the base
plate (8) of the combination mounting element. The two flanges (6) are kept at the
necessary distance by two joint heads (5) with left and right hand thread and an adapter
(1). The distance is set with the adapter (1). Two lock nuts (2) prevent the joint heads
from turning (5).
(numbering see fig. 4-3)
Fig. 4-2 Guidings for square surface areas
