Siemens SITRANS F MAG 6000 EX DE Скачать руководство пользователя страница 57

Страница: 57 / 107

MAG 6000 I / MAG 6000 I Ex de transmitter
Operating Instructions, 04/2016, A5E02083319-AG

Service and maintenance

Under ideal conditions the flowmeter will operate continuously with no manual adjustment or

intervention required.

9.1

Maintenance

The device is maintenance-free, however, a periodic inspection according to pertinent

directives and regulations must be carried out.
An inspection can include check of:

●

Ambient conditions

●

Seal integrity of the process connections, cable entries, and cover screws

●

Reliability of power supply, lightning protection, and grounds

9.2

Unit repair

NOTICE

Repair and service must be carried out by Siemens authorized personnel only.

Note
Siemens defines flow sensors as non-repairable products.

9.3

Technical support

If you have any technical questions about the device described in these Operating

Instructions and do not find the right answers, you can contact Customer Support:

●

Via the Internet using the Support Request:

Support request (

http://www.siemens.com/automation/support-request

)

●

Via Phone:
–

Europe: +49 (0)911 895 7222

–

America: +1 423 262 5710

–

Asia-Pacific: +86 10 6475 7575

Further information about our technical support is available on the Internet at

Technical support (

http://support.automation.siemens.com/WW/view/en/16604318

)

Содержание SITRANS F MAG 6000 EX DE












































































































Результаты поиска

Содержание SITRANS F MAG 6000 EX DE

Отзывы:

Siemens SITRANS F MAG 6000 EX DE, Руководство по эксплуатации, Страница: 57 / 107

Результаты поиска

Содержание SITRANS F MAG 6000 EX DE

Отзывы: