Siemens SITRANS F C MC2 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 60

Siemens SITRANS F C MC2 Скачать руководство пользователя страница 7

SITRANS F C MC2
Operating Instructions, 10/2009, A5E02154544-02

5

Introduction

1

These instructions contain all the information you need for using the device.
The instructions are aimed at persons mechanically installing the device, connecting it

electronically, configuring the parameters and commissioning it as well as service and

maintenance engineers.

Note
It is the responsibility of the customer that the instructions and directions provided in the

manual are read, understood and followed by the relevant personnel before installing the

device.

1.1

Items supplied

●  MC2 sensor
●  Sensorprom
●  Calibration report
●  Quick Start
●  CD-ROM

1.2

History

This document describes:
● SITRANS F C MC2
● SITRANS F C MC2 Hygienic

Documentation history

The contents of these instructions are regularly reviewed and corrections are included in

subsequent editions. We welcome all suggestions for improvement.
The following table shows the most important changes in the documentation compared to

each previous edition.

Edition

Remarks

10/2009

Updated information on electrical connections

05/2008

First edition of operating instructions for SITRANS F C MC2 and SITRANS F C MC2

Hygienic.

01/2006

Manual supplement for SITRANS F C MC1

«
...
5
6
7
8
9
...
»

Содержание SITRANS F C MC2





























































Отзывы:

Нет отзывов