manualshive.com logo in svg

Siemens SITRANS AW 7MP3112 Series, Руководство по эксплуатации

Поделиться
Скачать
Siemens SITRANS AW 7MP3112 Series Скачать руководство пользователя страница 7

Introduction

1

1.1

Purpose of this documentation

Read these instructions carefully prior to installation and commissioning. The instructions 

contain all the information you need for commissioning and using the device. In order to use the 

device correctly, first make yourself acquainted with its principle of operation.
It is aimed both at persons mechanically installing the device, connecting it electronically, 

configuring the parameters and commissioning it as well as service and maintenance 

engineers.

1.2

History

The most important changes in the documentation when compared with the previous edition 

are shown in the following table.   

Edition

Remark

01

12/2009

First edition. Product version 1.00.xx

02

01/2010

Extended Technical Specifications 

Additional information on national guidelines. 

Revised Internet links

AA
02/2020

Section Connecting a WirelessHART adapter to a computer using a modem (Page 46) 

added.

1.3

Notes on warranty

The contents of this programming manual shall not become part of or modify any prior or 

existing agreement, commitment or legal relationship. All obligations on the part of Siemens AG 

are contained in the respective sales contract, which also contains the complete and solely 

applicable warranty conditions. Any statements on the device versions described in the 

programming manual do not create new warranties or modify the existing warranty.
The content reflects the technical status at the time of printing. We reserve the right to make 

technical changes in the course of further development.

1.4

Product information

The manual can be found on the supplied CD. The programming manual is also available on 

the Siemens homepage.
The CD also contains the technical specifications sheet with ordering data and the EDD.

WirelessHART Adapter SITRANS AW200 

Operating Instructions, 02/2020, A5E02777161-AA

7

Содержание SITRANS AW 7MP3112 Series













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды