manualshive.com logo in svg

Siemens SITRANS AW 7MP3112 Series, Руководство по эксплуатации

Поделиться
Скачать
Siemens SITRANS AW 7MP3112 Series Скачать руководство пользователя страница 49

Parameter assignment/addressing

9

9.1

Operating functions using HART communication

Introduction

The full functionality of the WirelessHART adapter is available using HART communication.  
● The HART communicator and PC software are not supplied with the WirelessHART adapter.
● How to connect and operate a HART communicator or the PC software with a 

WirelessHART adapter is described in a separate manual and in the online help for both 

these tools.

Requirements for operator control via HART communication

You can operate the WirelessHART adapter via HART communication. The following is 

required for this purpose:
● A HART communicator or PC software such as SIMATIC PDM.
● A HART modem to connect a PC to the WirelessHART adapter or a connecting cable to 

connect a HART communicator to the WirelessHART adapter.

Note
Using SIMATIC PDM 
The following software requirements apply when you use SIMATIC PDM as configuration 

tool:
● Use EDD device description as of SIMATIC PDM V6.0 only 

with Service Pack 5 and Hotfix 2 (SIMATIC PDM V6.0 + SP5 + HF2).

● Make sure that the latest device version has been imported in SIMATIC PDM before you 

install the EDD device description.

Note
Quick start wizard of the EDD 
The EDD device description includes a quick start wizard that supports you during 

commissioning of the WirelessHART adapter.  

Range of parameter assignment options

Once you have set up HART communication to the WirelessHART adapter, you can make 

suitable parameter settings for the WirelessHART adapter.

WirelessHART Adapter SITRANS AW200 

Operating Instructions, 02/2020, A5E02777161-AA

49

Содержание SITRANS AW 7MP3112 Series













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды