SITOP UPS1600 under STEP 7 V12
Getting Started,
17
Installing and configuring the SITOP UPS1600 in
STEP 7 V12
5
To use the SITOP UPS1600, it must be assigned as IO device to an IO controller (S7 PLC).
The SITOP USP1600 in the project can also be equipped with one or more SITOP UPS1100
battery modules.
Preconditions
●
STEP 7 V12 has been opened.
●
The Hardware Support Package (HSP) of the SITOP UPS1600 has been installed
correctly.
●
A project with an S7 IO controller has been created.
Integrating the SITOP UPS1600
Inserting UPS1600 from the hardware catalog
1.
Open the project with the S7 IO controller and change to the project view.
2.
Call the network view.
3.
In the hardware catalog, navigate to the correct version of the UPS1600.
4.
Under the task card "Hardware catalog" in the palette "Catalog" open the folder "Power
Supplies > SITOP UPS > UPS1600" and click on the UPS1600.
