manualshive.com logo in svg

Siemens Sinumerik 810T, Руководство пользователя

"Siemens Sinumerik 810T" - это высокоточное и надежное устройство для управления машинами с ЧПУ. Здесь вы можете бесплатно скачать пользовательский мануал на manualshive.com. Мануал содержит подробные инструкции по эксплуатации и настройке устройства для оптимальной производительности. Скачивайте прямо сейчас!

Поделиться
Скачать
background image

09.91

3  Operating Sequences

3.1.9  TRANSMIT coordinate transformation

3.1.9.2

TRANSMIT function in the various modes

“AUTOMATIC” and “MDI AUTOMATIC” mode:

In this mode the TRANSMIT function is elected and deselected via G functions in the program.

Selection of TRANSMIT:

  G131 

Deselection of TRANSMIT:

  G130. 

On selection of TRANSMIT control initializes the fictitious axes. The NC interpolates only in the
fictitious coordinate system where the axes affected by TRANSMIT are concerned. The
contour between the block final values is defined. Please consult the instructions of the
machine manufacturer to see which axes are involved in TRANSMIT.

“JOG”, “INC”mode:

Definition:

Transformation grouping  =

real and fictitious axes involved in the
transformation

In JOG mode the axes of the transformation grouping can be traversed both in the real and in
the fictitious coordinate system. To be able to traverse a fictitious axis you must first select the
TRANSMIT transformation with G131 in the program. The machine manufacturer must also
have defined that TRANSMIT remain after a RESET (key or mode change), this does not
apply to “AUTOMATIC interrupted.”
Real axes cannot be traversed, if they belong to the transformation grouping. Traverse com-
mands coming from outside for such axes are ignored, without an error message appearing. 
If the control recognizes a traverse command for a fictitious axis, it generates the distance-to-
go to the software limit switch of the fictitious axis.  If the software limit switch is outside the
permissible working area of the machine tool, the limit switches of the real axes of the group-
ing restrict the fictitious position. If only the real axes are to be traversed, the channel 1
reserved by the transformation must be enabled again (deselection of the transformation via
G130). If a real axis of the transformation grouping is reserved by “feed halt”, this applies to all
axes of the grouping.

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

During “AUTOMATIC interrupted”, “TEACH IN” or “PLAYBACK” the

transformation grouping cannot be changed.

“REFPOINT” mode:

On a change to “REFPOINT” mode the TRANSMIT function is automatically deselected.
Reference points therefore only exist for real axes and not for fictitious axes.

“REPOS” mode:

After “block search” or “AUTOMATIC interrupted” the contour can only be approached in the
previously selected coordinate system.

©  Siemens AG 1990 All Rights Reserved      6ZB5 410-0EP02

3-39

SINUMERIK 810T, GA3 (BN)

Содержание Sinumerik 810T

























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Sinumerik 810T

CAME QBEMFSB2 User Manual preview
QBEMFSB2
Бренд: CAME Страницы: 19
E-Lins H900 Series User Manual preview
H900 Series
Бренд: E-Lins Страницы: 59
E-Lins H750 Quick Start Manual preview
H750
Бренд: E-Lins Страницы: 11
E-Lins H700 Series Quick Start Manual preview
H700 Series
Бренд: E-Lins Страницы: 9
E-Lins H685 Series Quick Start preview
H685 Series
Бренд: E-Lins Страницы: 5
e-Line Technology Network Video Recorders User Manual preview
Network Video Recorders
Бренд: e-Line Technology Страницы: 34
Lindy 25046 User Manual preview
25046
Бренд: Lindy Страницы: 4
Pima ZEL508 Installation Instructions preview
ZEL508
Бренд: Pima Страницы: 4
Tripp Lite N125-010-GY Specification Sheet preview
N125-010-GY
Бренд: Tripp Lite Страницы: 2
Google AC-1304 User Manual preview
AC-1304
Бренд: Google Страницы: 14
Winext GW5000A Manual preview
GW5000A
Бренд: Winext Страницы: 37
HARTING HAIIC MICA Hardware Development Manual preview
HAIIC MICA
Бренд: HARTING Страницы: 13
Blackmagicdesign Teranex 2D Processor Installation And Operation Manual preview
Teranex 2D Processor
Бренд: Blackmagicdesign Страницы: 969
Qlogic Storage Networking (Unified Fabric Pilot) Installation Manual preview
Storage Networking (Unified Fabric Pilot)
Бренд: Qlogic Страницы: 76
IBM System Storage DS3200 Overview preview
System Storage DS3200
Бренд: IBM Страницы: 2
ATI Technologies RADEON 9800 PRO Getting Started Manual preview
RADEON 9800 PRO
Бренд: ATI Technologies Страницы: 20
ZyXEL Communications G-170S User Manual preview
G-170S
Бренд: ZyXEL Communications Страницы: 79
mikroElektronika Pressure click Quick Start Manual preview
Pressure click
Бренд: mikroElektronika Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды