Siemens SINEMA Remote Connect Скачать руководство пользователя страница 66

Страница: 66 / 122

Configuring with Web Based Management

4.7 Remote connections

SINEMA Remote Connect - Server

Operating Instructions, 11/2017, C79000-G8976-C383-04

Box

Meaning

Status

The device is connected to SINEMA RC server via VPN.

The device is disabled.

The device is not connected to SINEMA RC server via VPN.

Location

Location of the device. This can, for example, be the installation location of the device.

Type of connec-

tion

Shows when the connection will be established.
1.

Permanent: The VPN connection exists permanently:

Digital input: The VPN connection is established as soon as a signal is applied to the "digital input".

Wake-up SMS: An alarm SMS message is sent to the device.

Digital input & Wake-up SMS

VPN protocol

Shows which protocol is being used for the VPN connection.
1.

OpenVPN: The connection will be established via OpenVPN.

IPsec: The connection will be established via IPsec.

Actions

You obtain an overview of the device information.
The device information contains the device ID and the fingerprint. These two pieces of infor-

mation need to be entered on the device. During connection establishment, the device authenti-

cates itself with the SINEMA RC Server using this information.

Changing device settings

The configuration file with the OpenVPN settings for this device is created and can be saved.

The file can be exported to the end device.

A password protected PKCS#12 file is created and can be saved. The certificate is derived from

the last valid CA. The file contains the private key of the device with the corresponding certifi-

cate. The file can be exported to the end device. When the password is queried, enter the pass-

word you specified when you created the device (refer to the section "Creating a new device

(Page 68)").

The certificate and the key are stored as Base64-coded ASCII text.

Displays the participant group to which the selected device is assigned.

Deactivate device.

•

If the device is connected, the existing connection is also deactivated.

•

If the device attempts to establish a VPN connection, the device is ignored by the SINEMA

RC Server.

Activate device. The device can establish a VPN connection to the SINEMA RC Server.

Only available with the type of connection "Wake-up SMS" or "Digital input & Wake-up SMS".

•

If the device is not connected, the SINEMA RC Server sends the wake-up SMS message to

the device.

Содержание SINEMA Remote Connect



























































































































Результаты поиска

Содержание SINEMA Remote Connect

Отзывы:

Бренды по названию

Популярные бренды

Siemens SINEMA Remote Connect, Руководство по эксплуатации

Результаты поиска

Содержание SINEMA Remote Connect

Отзывы:

Бренды по названию

Популярные бренды