Siemens SINAMICS SL150 6SL38655UM427AA02 Скачать руководство пользователя страница 23

Страница: 23 / 104

Description

3.1

Applications

The water-cooled cycloconverters for tube mill drives are used for slow speed drives with a high

power rating and the highest torques. For instance, these conditions prevail in the cement and

ore industry.
The cycloconverters are based on water-cooled thyristor stack technology. The converter is

suitable for four-quadrant operation without any additional equipment. This means that driving

and braking are possible in both directions of rotation.
The main components are:
● SINAMICS closed-loop control with CU and SIMOTION module
● Power module in degree of protection IP00

Depending on the circuit, the power module consists of three (12-pulse) or six (2x6-pulse)

open, water-cooled modules in a fuseless arrangement. Each group of three modules is

assembled as a "stack".

● Additional components

Every converter is assigned a package with additional components. The additional

components comprise AVT combi, voltage sensing, current sensing and overvoltage

limiting. The additional components are required to assemble a complete device.

Note
Auxiliary plant equipment
All auxiliary equipment necessary for operation, control and monitoring of the converter

must be specified and incorporated by the system integrator. The equipment is not included

in the scope of delivery.

3.2

Safety concept

DANGER

Insufficient grounding
High voltages can still be present even after shutdown. If live parts are touched, this can result

in death or severe injury.
A grounding switch is not installed. The system operator must, therefore, ensure that there is

sufficient grounding.
Ensure sufficient grounding during work on the power unit. Further information on grounding

can be found under "Safety information for maintenance and repairs".

SINAMICS SL150 6SL38655UM427AA02

Operating Instructions Rev.201910281507 EXAMPLE

Содержание SINAMICS SL150 6SL38655UM427AA02









































































































Результаты поиска

Содержание SINAMICS SL150 6SL38655UM427AA02

Отзывы:

Похожие инструкции для SINAMICS SL150 6SL38655UM427AA02

Бренды по названию

Популярные бренды

Siemens SINAMICS SL150 6SL38655UM427AA02, Руководство по эксплуатации

Результаты поиска

Содержание SINAMICS SL150 6SL38655UM427AA02

Отзывы:

Похожие инструкции для SINAMICS SL150 6SL38655UM427AA02

Бренды по названию

Популярные бренды