Siemens SINAMICS RAILCTRL Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 106

background image

5.5

Communication

The control system and the individual drive objects communicate using an extended standard

telegram, for example standard telegram 2, see function diagram "7366 – Standard telegram 2

extended, control word, status word (Page 78)".

Precondition

The following general conditions apply regarding the communication:
● The RAILCTRL Technology Extension must be installed on a CU and be activated for every

SERVO drive object (every segment) involved along the path.

● An instance of the RAILCTRL Technology Extension with its own parameters exists for each

segment.

● Every SERVO drive object (segment) must be interconnected with its predecessor and

successor segments using RAILCTRL parameters.

Segment transition

For the segment transition with the RAILCTRL Technology Extension, the SERVO drive

objects communicate within a Control Unit.
Function diagram "7361 – Geometry data, interconnection of SERVO drive objects (Page 73)"

shows the interconnection of the segments within a Control Unit.
For the jerk-free transition, the motor segments for the RAILCTRL Technology Extension can

be brought into the following states:
● "Slave preceding"
● "Master"
● "Slave following"
● "Off"
The segment states are switched depending on the associated application mode:
● Segment transition in open-loop-controlled operation

The sequential control for the segment transition is taken from the higher-level control

system. Whereby, the value for the control word of the sequential control is provided as an

extended standard telegram from the higher-level control system.

● Segment transition in closed-loop-controlled operation

In closed-loop-controlled operation, the geometrical data are calculated based on the

evaluated encoder values. The transitions between states are modeled based on the

geometrical data. To change the states of two segments synchronously, the encoder values

of the adjacent segments are evaluated in parallel.

With the coupling of the segments, the controlled variables are transferred from the master to

the slave.

Function description
5.5 Communication

RAILCTRL

38

Function Manual, 09/2019, A5E38120767B

«
...
38
39
40
41
42
...
»

Содержание SINAMICS RAILCTRL











































































































Отзывы:

Нет отзывов

Похожие инструкции для SINAMICS RAILCTRL

Бренд: Samson Страницы: 78

Бренд: Rachio Страницы: 16

Бренд: Balboa Страницы: 12

Бренд: Paoli Страницы: 16

Бренд: Cansec Страницы: 45

Бренд: Cansec Страницы: 43

Бренд: Cansec Страницы: 32

Бренд: Harmonic Drive Страницы: 25

Бренд: Nelson Страницы: 8

Бренд: Jabra Страницы: 18

Бренд: S&P Страницы: 17

Бренд: S&S Northern Страницы: 9

Бренд: Yealink Страницы: 8

Бренд: National Instruments Страницы: 72

Бренд: National Instruments Страницы: 41

MAGNUM ALERT 3000 FIRE ALARM

Бренд: NAPCO Страницы: 2

CPX-AP-A-16DI-D-M12-5P

Бренд: Festo Страницы: 16

Bell & Gossett Technologic PPS

Бренд: Xylem Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды