Siemens SINAMICS DCM 6RA80 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 79

Siemens SINAMICS DCM 6RA80 Скачать руководство пользователя страница 2

2

CUD (Control Unit DC):

Control unit for the SINAMICS DCM.
The CUD is available in two versions:
Standard CUD: No connection option for the CBE20 (PROFINET module) and no
DRIVE-CLiQ interface.
Advanced CUD (G00 option). This is required for operating a CBE20 module and for
connecting the following components: TM31, TM15, TM150(From Firmware V1.4) SMC30
(maximum of 3 of the listed components TM31/TM15/TM150 possible per CUD, and one of
the SMC30).
The Advanced CUD is characterized by the incorporated slot for the CBE20.

Second CUD

The Standard version of the SINAMICS DCM (without options) comes equipped with a
Standard CUD on the left-hand side, from which the entire SINAMICS DCM is controlled.
If a Standard CUD or Advanced CUD is inserted in the right-hand slot, an Advanced CUD is
always required in the left-hand slot.
See Section 10.30. of the Operating Instructions.
A second CUD is used if more inputs/outputs, more interfaces or additional computing power
for function blocks are required.

The LEDs on the CUD:

See Section 10.33.4 of the Operating Instructions

Basic Operating Panel BOP20 (in the device):

See Section 9.2 of the Operating Instructions.
For control (switch on) via the BOP20, see Section 9.2.4 of the Operating Instructions.

Advanced Operating Panel AOP30 (accessories):

See Section 9.3 of the Operating Instructions.
The new AOP30 with order number 6SL3055-0AA00-4CA4 or -4CA5 must be used.
For each device (with up to 2 CUD) a own AOP30 necessary.

Software update

See Section 11.1 of the Operating Instructions

Memory card:

A memory card is not required for operating the SINAMICS DCM.
A memory card must be used for the following applications:
For a software update.
If the AOP30 is used for additional languages (except German/English).
If a controller – controller direct data exchange (SINAMICS Link via the CBE20) is used
(possible from software version 1.2). (SINAMICS Link. See Chapter 10.6 of Operating
Instructions)
For a DCC database update.
When using the diagnostic memory and trend recorder function.
Allowed are MMC or SD with 64 MB to 2 GB. .See Section 9.1.4 of the Operating Instructions

Drive Objects, DO

A drive object is a self-contained software function with its own parameters, faults and
alarms.
A CUD (Control Unit DC) has 2 DOs.
Control unit, CU_DC: DO1
Drive control, DC_CTRL; DO2
Furthermore, each additional component has its own DO e.g. TM31.
See Section 9.1.3 of the Operating Instructions

«
1
2
3
4
...
»

Содержание SINAMICS DCM 6RA80
















































































Отзывы:

Нет отзывов