manualshive.com logo in svg

Siemens SINAMICS CONNECT 500, Руководство по эксплуатации

Поделиться
Скачать
Siemens SINAMICS CONNECT 500 Скачать руководство пользователя страница 37

3. Right-click in field "Xml File containing message texts".
4. Select the shortcut menu command "Select".
5. Navigate to directory "C:\ProgramData\Siemens\DriveSystemConnect\config

\SinamicsBase\GM150"

6. Select the alarm list that matches your firmware.
7. Click on "Open".
8. Select menu command "File > Save".

Restart service "Drive System Connect".

After you have replaced the parameter lists and alarm lists on the Control Unit of the 

converter, restart service "Drive System Connect" (Page 44).

7.8

Checking the connections to the converter Control Unit

You can check the connections to the converter Control Unit using application "Drive System 

Connect Diagnose". Connections to the GM150 converter are checked in the following 

example.

Checking the connection

1. Open application "Drive System Connect Diagnose".
2. Open the "GM150" plugin (or that of another converter).

Commissioning

7.8 Checking the connections to the converter Control Unit

SINAMICS CONNECT 500

Operating Instructions, 10/2019

35

Содержание SINAMICS CONNECT 500





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды