Siemens SIMOTICS DP 1PC13 Скачать руководство пользователя страница 12

Страница: 12 / 100

Safety information

2.3 Qualified personnel

Smoke extraction motors

Operating Instructions, 03/2016, 5 610 80000 40 018

2.3

Qualified personnel

All work at the machine must be carried out by qualified personnel only. For the purpose of

this documentation, qualified personnel is taken to mean people who fulfill the following

requirements:

●

Through appropriate training and experience, they are able to recognize and avoid risks

and potential dangers in their particular field of activity.

●

They have been instructed to carry out work on the machine by the appropriate person

responsible.

2.4

Safe handling

Workplace safety depends on the attentiveness, care, and common sense of the personnel

who install, operate, and maintain the machine. In addition to the safety measures cited, as a

matter of principle, the use of caution is necessary when you are near the machine. Always

pay attention to your safety.
Also observe the following to prevent accidents:

●

General safety regulations applicable in the country where the machine is deployed.

●

Manufacturer-specific and application-specific regulations

●

Special agreements made with the operator

●

Separate safety instructions supplied with the machine

●

Safety symbols and instructions on the machine and its packaging

WARNING

Live parts
Electric machines contain live parts.
Fatal or severe injuries and substantial material damage can occur if the covers are

removed or if the machine is not handled, operated, or maintained properly.

•

Always observe the “five safety rules" when carrying out any work on the machine.

•

Only remove the covers using the methods described by these operating instructions.

•

Operate the machine properly.

•

Regularly and correctly maintain the machine.

WARNING

Rotating parts
Electric machines contain dangerous rotating parts.
Fatal or severe injuries and substantial material damage can occur if the covers are

removed or if the machine is not handled, operated, or maintained properly.

•

Only remove the covers using the methods described by these operating instructions.

•

Operate the machine properly.

•

Regularly and correctly maintain the machine.

•

Secure free-standing shaft ends and other rotating parts such as couplings, belt pulleys

etc. against touch.

Содержание SIMOTICS DP 1PC13





































































































Результаты поиска

Содержание SIMOTICS DP 1PC13

Отзывы:

Похожие инструкции для SIMOTICS DP 1PC13

Бренды по названию

Популярные бренды

Siemens SIMOTICS DP 1PC13, Руководство по эксплуатации

Результаты поиска

Содержание SIMOTICS DP 1PC13

Отзывы:

Похожие инструкции для SIMOTICS DP 1PC13

Бренды по названию

Популярные бренды