Siemens SIMOGEAR BA 2730, Руководство по эксплуатации

Страница: 10 / 30

General information and safety notes
1.3 Intended use
BA 2730
8
Operating Instructions, 02/2021, A5E36448105A/RS-AG
The external encoder components are manufactured out of the following materials:
•
Torque arm, hollow shaft and clamping ring: V2A
• Enclosure: Die cast zinc Z410
• Flange: AlCu6BiPb, AlMgSiSnBi or AlCu4PbMgMn
The geared motor is only safe when used together with a suitable encoder evaluation and
motor protection evaluation.
The geared motor is certified for ambient temperatures ranging from -30 °C to +50 °C and an
installation altitude up to 1 000 m above sea level.
The encoder is certified for a maximum ambient temperature of +50 °C, for simultaneous use
of the motors according to temperature class 155 (F) as a maximum.
The encoder is suitable for degrees of protection
≤ IP65.
The encoder is designed for a maximum motor speed of 4000 rpm.
The encoder is designed for a maximum angular velocity of the motor of 4000 rad/s
2 .
The motor is certified for vibration and shock according to EN 60721-3-3, up to and including
Class 3M3.
Only use the brake as holding brake with emergency stop function.
Only operate the anti-condensation heating at standstill.
The geared motors are designed and built according to state-of-the-art technology and are
shipped in an operationally safe condition. Changes made by users negatively impact
operational reliability and are forbidden.
The geared motor is designed for installation in a machine. The company operating the
machine is responsible for complying with functional safety. The person marketing or
operating the machine is responsible for the necessary safety functions and their attributes.