Siemens SIMEAS P 7KG7550 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 52

Siemens SIMEAS P 7KG7550 Скачать руководство пользователя страница 10

8

1.7

Mode of Operation

Input voltages and currents are sampled for calculation of
the corresponding r.m.s. values. All measurements derived
from sampled values are calculated by a processor.
Measured quantities can be displayed on the screens and/or
transmitted via the serial interface.
With the SIMEAS P, it is possible to program limit value
groups for various measured quantities to activate limit
violations when the value of a specific measured quantity
exceeds a programmed threshold. In addition, it is possible
use logical elements (AND, OR, etc.) to combine two or
more measured quantities for the purpose of generating a
limit violation. Limit violations are counted, indicated on the
screen and/or utilized to operate the binary output contacts.
The oscilloscope may be triggered via a limit violation as
well.
All measured quantities can be displayed on the

SIMEAS P screens as required by the user. Up to 20
screens can be selected with the front keys. The number,
type, content and sequence of the screens are configurable.
SIMEAS P is delivered with pre-programmed default
settings.
A status line displayed in the measured value screens
indicates status, interfacing and diagnostic messages for
the SIMEAS P.
The display is automatically refreshed every second.

«
...
8
9
10
11
12
...
»

Содержание SIMEAS P 7KG7550





















































Отзывы:

Нет отзывов