Siemens SIMATIC TS Adapter IE Скачать руководство пользователя

Страница: 39 / 102

TS Adapter IE
Manual, 11/2010, A5E00977705-03

Working with the TS Adapter IE

7.1

Safety Instructions

Qualified personnel

The device may only be serviced by qualified personnel. Qualified personnel under the terms

of the safety instructions contained in this manual is defined as persons who are authorized

to commission, ground and label devices, systems and circuits in accordance with

established safety practices and standards.

WARNING

Regulation use:
The device may only be used for the applications described in the catalog and the technical

description, and only in connection with third-party devices and components approved or

recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and

installed correctly, and operated and maintained with due care and attention.

7.2

Software Installation

Procedure

Insert the supplied "SIMATIC TeleService Edition" DVD into the DVD drive of your PC.

The setup runs automatically. Follow the on-screen instructions provided by the setup

program.

If the autostart function is disabled for your DVD drive, run the setup program by double-

clicking

Setup.exe in the root folder of your "SIMATIC TeleService Edition" DVD.

Содержание SIMATIC TS Adapter IE







































































































Результаты поиска

Содержание SIMATIC TS Adapter IE

Отзывы:

Похожие инструкции для SIMATIC TS Adapter IE

Бренды по названию

Популярные бренды

Siemens SIMATIC TS Adapter IE, Руководство пользователя

Результаты поиска

Содержание SIMATIC TS Adapter IE

Отзывы:

Похожие инструкции для SIMATIC TS Adapter IE

Бренды по названию

Популярные бренды