manualshive.com logo in svg

Siemens SIMATIC TS Adapter IE, Руководство пользователя

Поделиться
Скачать
Siemens SIMATIC TS Adapter IE Скачать руководство пользователя страница 16

Mounting 

 

4.2 Mounting on Profile Rails 

 

TS Adapter IE 

16

 

Manual, 11/2010, A5E00977705-03 

4.2

 

Mounting on Profile Rails 

Mounting TS Adapter IE 

1.

 

Place the TS Adapter IE on the last slot of the profile rail. 
The TS Adapter IE does not require the bus connector used on S7-300 modules.  

2.

 

Attach the TS Adapter IE ❶. 

3.

 

Slide the TS Adapter IE as far as the left side module ❷. 

4.

 

Swivel the TS Adapter IE downward ❸.  

76$GDS

WHU,(

 

5.

 

Hand-tighten the TS Adapter IE. 

76$GDSWHU,

(

 

Dismounting TS Adapter IE 

 

WARNING 

 

Unplug the connectors from the analog and Ethernet cables of the TS Adapter IE before 

dismounting the TS Adapter IE from the grounded profile rail or DIN rail. 

 

1.

 

Slacken the fixing screw of the TS Adapter IE. 

2.

 

Swivel the TS Adapter IE up ❸. 

Содержание SIMATIC TS Adapter IE







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды