Siemens SIMATIC S7-300 CPU Data: CPU 315-T-2 DP, Руководство пользователя

Страница: 13 / 67

2 Solution
2.3 Hardware and software components used
Monitoring of 24 V load circuits
Entry-ID: 61450284, V1.1, 05/2014
13
C
o
p
y
ri
g
h
t
S
ie
m
e
n
s
A
G
2
0
1
4
A
ll
ri
g
h
ts
re
s
e
rv
e
d
2.3 Hardware and software components used
The application document was generated using the following components:
Hardware components
Table 2-5
Component Qty. Order number Note
Controlled
power supply:
SITOP smart 24 V/10 A 1 6EP1334-2BA01 Alternatively, you can use any
24 V DC power supply with an output
current of up to 40 A
SITOP PSE200U with
single-channel signaling 1 6EP1961-2BA31 Alternatively, you can also use the
version for monitoring higher
currents (4 x 3 to 10 A):
6EP961-2BA41
SIMATIC S7-300 CPU 1 6ES7315-2AG10-0AB0 Alternatively, you can use any
S7-300/400 CPU.
CP343-1 1 6GK7343-1EX30-0XE0 Using an S7-CPU with integrated
PROFINET interface does not
require an Industrial Ethernet CP.
Digital input module /
Digital output module:
SM323 DI8/DO8 24V 1 6ES7323-1BH01-0AA0 Alternatively, you can use another
digital input module or digital output
module.
TP900 Comfort Panel 1 6AV2124-0JC01-0AX0
Standard software components
Table 2-6
Component Qty. Order number Note
STEP 7 Professional
V12 SP1 Upd4 1 6ES7822-1AA02-0YA5 Configuring the S7-CPUs requires
STEP 7 Professional V12 SP1 Upd4
or higher.
WinCC Professional
V12 SP1 Upd4 1 6AV2103-0XA02-0AA5 Configuring the SIMATIC Panel
requires WinCC Professional V12
SP1 Upd4 or higher.
Note
Service Pack 1 (SP1) for STEP 7 V12 is available to you as download on the internet (see
\5\
).
Service Pack 1 (SP1) for WinCC V12 is available to you as download on the internet (see
\6\
).
The current updates for STEP 7 V12 SP1 and WinCC V12 SP1 are available to you as
download on the internet (see
\7\
).