manualshive.com logo in svg

Siemens SIMATIC S5-90U, Системное руководство


Поделиться
Скачать
background image

Module Spectrum 

 S5-90U/S5-95U

Start-Up of Module

Set the intended operating mode using the switch on the front panel of analog input module 464-
8ME11.  This switch is located on the right side at the top of the front panel of the module.

Power supply

Set the

 

switch

 

to the available power supply frequency.  This selects the inte- 

frequency:

gration time of the A/D converters for optimal interference voltage suppression.
Power frequency 50 Hz:

Integration time 20 ms

Power frequency 60 Hz:

Integration time 16.66 ms

Operation:

Set the number of channels you wish to assign on the input module.  If there
are fewer than four channels, the measured values will be updated faster.

Broken wire:

Inputs 4, 6, 8 and 10 are connected internally via shunt resistors.
Because of the internal shunt resistors, broken wire signalling is not possible.

Table 15-23.   Settings of the Operating Mode Switch for Analog Input Module 464-8ME11

1 channel (ch.0)

2 chan. (ch.0

 

+ ch1)

4 chan. (ch.0 to 3)

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Settings for Operating Mode Switch

60 Hz

50 Hz

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Function

Power supply

frequency

Operation

No function

4
3
2
1

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

4
3
2
1

4
3
2
1

4
3
2
1

4
3
2
1

4
3
2
1

4
3
2
1

15-76

EWA 4NEB 812 6115-02b

Содержание SIMATIC S5-90U















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SIMATIC S5-90U

Sole Diesel SVT 10 Operator'S Manual preview
SVT 10
Бренд: Sole Diesel Страницы: 8
Saitek X36 Manual preview
X36
Бренд: Saitek Страницы: 4
ABC Design Tandem Instructions For Use Manual preview
Tandem
Бренд: ABC Design Страницы: 38
easydriver Pro Installation And Instruction Manual preview
Pro
Бренд: easydriver Страницы: 26
Calsense CS3000 Quick Start Manual preview
CS3000
Бренд: Calsense Страницы: 10
ABC Design Rodeo Instructions Manual preview
Rodeo
Бренд: ABC Design Страницы: 10
ABC Design Astro Instruction Manual preview
Astro
Бренд: ABC Design Страницы: 10
GBD BA100 Instructions For Installations preview
BA100
Бренд: GBD Страницы: 68
Fagor CNC 8070 Original Instructions Manual preview
CNC 8070
Бренд: Fagor Страницы: 10
Fagor CNC 8070 Operating Manual preview
CNC 8070
Бренд: Fagor Страницы: 358
Fagor CNC 8070 Programming Manual preview
CNC 8070
Бренд: Fagor Страницы: 556
Fagor CNC 8060 Operating Manual preview
CNC 8060
Бренд: Fagor Страницы: 172
Fagor CNC 8060 Translation Of The Original Manual preview
CNC 8060
Бренд: Fagor Страницы: 180
Fagor CNC 8060 Hardware Configuration preview
CNC 8060
Бренд: Fagor Страницы: 112
FaderMate Master Control Unit Fittings Manual preview
Master Control Unit
Бренд: FaderMate Страницы: 36
Parkside PDWE 8 A2 Operation And Safety Notes Translation Of The Original Instructions preview
PDWE 8 A2
Бренд: Parkside Страницы: 65
NAiS FP2 Technical Manual preview
FP2
Бренд: NAiS Страницы: 144
Panasonic KX-A16B Quick Start Manual preview
KX-A16B
Бренд: Panasonic Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды