manualshive.com logo in svg

Siemens SIMATIC S5-90U, Системное руководство


Поделиться
Скачать
background image

Function Modules 

 S5-90U/S5-95U

Function

The counter module can be used as an up-counter or as an up/down counter for a position decoder.
The counting pulses are supplied by a sensor that you can connect to the 15-pin subminiature D
female connector of the module.  You can choose from two types of sensors that fulfill the following
requirements.

•

5-V error voltages according to RS 422 (up to 500 kHz) 

•

24-V signals (up to 25 kHz)

As additional inputs, the module has an enable input and a reference input connected to terminals
on the 10-terminal strip that is on the bottom of the bus unit.

By using the STEP 5 program, you can assign two setpoints via the I/O bus.  These setpoints are
output to channels 0 and 1 in the I/O slot for the module.  Once the counter status reaches one of
these values, the respective output completes the circuit at terminal block (Q0 or Q1).  The status of
the outputs is displayed in the diagnostic byte in status bits S1 and S2.

You can also read the following values by using the STEP 5 program.
•

The updated count (load IW channel 1 and 2)

•

The diagnostic byte (load IW channel 0 high byte)

You can preselect the following items on the operating mode switch.
•

Function mode (counter/position decoder)

•

Position resolution (X1, X2, or X4)

•

Input voltage range of the sensor (5 V DC or 24 V DC)

Figure 16-8.   Switch Positions on the Operating Mode Switch

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Position decoding (PD)

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Counter (C)

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Pos. resolution

single

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Pos. resolution

double

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Pos. resolution

quadruple

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

not allowed

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Sensor connection

5 V

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Sensor connection

24 V

a a a a a a

a a a a a a

a a a a a a

2×

a a a a a a

a a a a a a

a a a a a a

4×

a a a a a

a a a a a

a a a a a

PD

a a a a a

a a a a a

a a a a a

a a a a a

SV

a a a a a a a

a a a a a a a

a a a a a a a

a a a a a a a

24 V

16-20

EWA 4NEB 812 6115-02b

Содержание SIMATIC S5-90U















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SIMATIC S5-90U

Handicare VR2 User Manual preview
VR2
Бренд: Handicare Страницы: 56
H3C S9500E Series Card Manual preview
S9500E Series
Бренд: H3C Страницы: 5
H3C WX1800H series Command Reference Manual preview
WX1800H series
Бренд: H3C Страницы: 27
H3C WX3500H series Installations preview
WX3500H series
Бренд: H3C Страницы: 4
H3C WX5540H Installation Manual preview
WX5540H
Бренд: H3C Страницы: 54
H3C LSWM1WCM10 Manual preview
LSWM1WCM10
Бренд: H3C Страницы: 10
H3C LSQM1WCMB0 Quick Start Manual preview
LSQM1WCMB0
Бренд: H3C Страницы: 10
OBaby mercury Instruction Manual preview
mercury
Бренд: OBaby Страницы: 7
Taoglas EDGE Locate Quick Start Manual preview
EDGE Locate
Бренд: Taoglas Страницы: 2
tau K125M Installation Manuals preview
K125M
Бренд: tau Страницы: 9
tau K100M Translation Of Original Instructions preview
K100M
Бренд: tau Страницы: 8
WAREMA Wisotronic Operating Instructions Manual preview
Wisotronic
Бренд: WAREMA Страницы: 112
WAGO 750-880 Manual preview
750-880
Бренд: WAGO Страницы: 414
V2 Blitz Manual preview
Blitz
Бренд: V2 Страницы: 48
X-lander X-cite Manual preview
X-cite
Бренд: X-lander Страницы: 72
X Rocker 2.1 Wireless Manual preview
2.1 Wireless
Бренд: X Rocker Страницы: 38
Zamel P-258/2 Instructions Manual preview
P-258/2
Бренд: Zamel Страницы: 23
Zamel P-256/8 Manual Instruction preview
P-256/8
Бренд: Zamel Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды