Siemens SIMATIC RF650M Скачать руководство пользователя страница 73

Страница: 73 / 76

SIMATIC RF650M mobile reader
Operating Instructions, 04/2015, C79000-G8976-C404-01

Appendix

A.1

Certificates and approvals

Table A- 1

Certificates and approvals for SIMATIC RF650M

Certificates and approvals

Description

CE approval to R&TTE

FCC
Federal Communications Com-

mission

This hand-held device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including

interference that may cause undesired operation.
Caution
Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to oper-

ate the hand-held equipment.
Note
This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC

rules. These limits are designed to provide reasonable protection

against harmful interference in a commercial environment. This

equipment generates, uses, and can radiate radio frequency ener-

gy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful inter-

ference to radio or television reception, which can be determined

by turning the equipment off an on, the user is encouraged to try to

correct the interference by one or more of following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for

help.

Содержание SIMATIC RF650M













































































Результаты поиска

Содержание SIMATIC RF650M

Отзывы:

Похожие инструкции для SIMATIC RF650M

Бренды по названию

Популярные бренды

Siemens SIMATIC RF650M, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC RF650M

Отзывы:

Похожие инструкции для SIMATIC RF650M

Бренды по названию

Популярные бренды