Siemens SIMATIC PCS 7 OSx Скачать руководство пользователя

Страница: 96 / 232

OSx Station Control

2-14

SIMATIC PCS 7 OSx 4.1.2 Operator

Role_Change Command (continued)

OSx stations change roles automatically under the following conditions.

•

When you change a station to the primary or backup role, the station

that previously held the role automatically changes to the normal role.

The replacement station changes to the newly selected role (primary or

backup). This process normally occurs very quickly, but there is a brief

period when the two stations have the same role. If an error occurs

during the process, both stations retain their previous roles.

•

When the primary loses contact with the other OSx stations, its role

changes automatically to out_of_service and it enters the Failed state.

Limited communication with the control nodes may still be possible if

the ethernet communications layer is still functioning.

Keep the following considerations in mind concerning automatic role

changes.

•

If an OSx station loses contact with the primary, that station makes an

entry in its local copy of the database that the primary is

out_of_service.

•

When you shut down the PCS 7 OSx system, each station makes an

entry in its local copy of the database that all other stations except the

primary are out_of_service. The primary role is preserved so that when

you restart OSx, all stations can then contact the primary.

•

If a station loses contact with the primary, the system automatically

sets the station to the out_of_service role.

When Role_Change to Normal Executes

This command is only

executed when the following conditions are true.

•

The local OSx station has an active primary in its database.

•

No OSx station in the system is synchronizing to the primary.

When Role_Change to Sys_Admin Executes

This command is only

executed when the following conditions are true.

•

No OSx station in the system is synchronizing to the primary.

•

The selected station is a supervisory station.

When Role_Change to Out_of_Service Executes

This command is

executed whenever you select the option.

Automatic Role
Changes

Содержание SIMATIC PCS 7 OSx









































































































































































































































Результаты поиска

Содержание SIMATIC PCS 7 OSx

Отзывы:

Похожие инструкции для SIMATIC PCS 7 OSx

Бренды по названию

Популярные бренды

Siemens SIMATIC PCS 7 OSx, Руководство оператора

Результаты поиска

Содержание SIMATIC PCS 7 OSx

Отзывы:

Похожие инструкции для SIMATIC PCS 7 OSx

Бренды по названию

Популярные бренды