Siemens SIMATIC PCS 7 OSx Скачать руководство пользователя

Страница: 39 / 232

OSx Station Basics

1-17

SIMATIC PCS 7 OSx 4.1.2 Operator

Table 1-3

lists the menu bar functions and the following restrictions.

•

Type of OSx station/role allowed: primary, sysadmin, supervisory,

operator.

•

Whether operations are restricted to one OSx station at a time (Yes in

the One Station column).

•

System state required for execution (Offline or Operate).

Use the key below to interpret the table entries for

Table 1-3 on page 1-18

Key:

✓

= Full capability is supported.

= Cannot run.

= If an OSx station with sysadmin role is configured, must be

done on this station.

✴

= If an OSx station with sysadmin role is configured, must be

done on this station. Otherwise, must be done on primary while

no other station is joined to the primary.

= Cannot add, modify, or delete control nodes.

= Cannot delete or modify except for text and embedded tags.

= Cannot delete or modify.

= Can only see list of reports.

= Cannot delete tags or make certain modifications.

Yes

= Runs on only one OSx station at a time.

= Runs on any number of OSx stations at a time.

The availability of menu items in OSx changes based on events that occur in

the system. If you select a menu item when the system is updating the

menu, the item you choose may be dismissed. If this happens, simply select

the item again.

Some menu utilities are designed to be active on one OSx station at a time.

However, in a multiple-station system, there is a small possibility that two

or more users can access such a utility at the same time on different OSx

stations. If this occurs, the user who saves changes last is the one whose

changes will be in effect on all stations. An exception occurs when the first

user deletes the configuration that a second user has accessed. In this case,

the second user will get an error message when attempting to save the

configuration.

You can run Network Setup on only one OSx station at a time if there is no

sysadmin station in the system. If a sysadmin exists, you can run Network

Setup on the sysadmin and one other station at the same time, provided you

bring it up on the sysadmin first.

Accessing Menu
Bar Functions

Содержание SIMATIC PCS 7 OSx









































































































































































































































Результаты поиска

Содержание SIMATIC PCS 7 OSx

Отзывы:

Похожие инструкции для SIMATIC PCS 7 OSx

Бренды по названию

Популярные бренды

Siemens SIMATIC PCS 7 OSx, Руководство оператора

Результаты поиска

Содержание SIMATIC PCS 7 OSx

Отзывы:

Похожие инструкции для SIMATIC PCS 7 OSx

Бренды по названию

Популярные бренды