Siemens SIMATIC NET SCP Series, Руководство по эксплуатации

Страница: 33 / 58

Properties
Receiver input
Sensitivity min. -19 dBm
Input power max. -3 dBm
*
)
Depending on the cable used, you can find additional information in the "Industrial Ethernet /
PROFINET Passive network components" System Manual, see also section "Introduction", paragraph
"Additional documentation".
7.1.8 SFP992-1LD+
Properties
Transmission mode
1000Base-LX complying with IEEE 802.3
Transmission rate 1000 Mbps (Gigabit Ethernet)
Transmission medium Single mode fiber-optic cable
Light source Class1-LASER "Eye safe"
Wavelength 1310 nm
Cable length (max.) *
)
30 km
Transmitter output (optical) Minimum -5 dBm
Maximum 0 dBm
Receiver input Sensitivity min. -24 dBm
Input power max. 0 dBm
*
)
Depending on the cable used, you can find additional information in the "Industrial Ethernet /
PROFINET Passive network components" System Manual, see also section "Introduction", paragraph
"Additional documentation".
7.1.9 SFP992-1LH
Properties
Transmission mode
1000Base-EX complying with IEEE 802.3
Transmission rate 1000 Mbps (Gigabit Ethernet)
Transmission medium Single mode fiber-optic cable
Light source Class1-LASER "Eye safe"
Wavelength 1550 nm
Cable length (max.) *
)
40 km
Transmitter output (optical) Minimum -6 dBm
Maximum 0 dBm
Receiver input Sensitivity min. -23 dBm
Input power max. -3 dBm
*
)
Depending on the cable used, you can find additional information in the "Industrial Ethernet /
PROFINET Passive network components" System Manual, see also section "Introduction", paragraph
"Additional documentation".
Technical data
7.1 SFP transceiver
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2019, A5E02630804-13
33